-
May 29th, 2001, 04:37 AM
#1
Senior Hostboard Member
Those numbers are very good... who installed your kit ???
------------------
'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph
-
May 29th, 2001, 06:27 AM
#2
Inactive Member
Actually, I installed my kit. Holden's website was a big help.
-
May 29th, 2001, 11:10 AM
#3
Inactive Member
Thanks. I'm glad it helped.
What 3" short intake did you go with?
The consensus around here is swinging towards favoring a 3" short ram over a CAI and your numbers, which are exceptionally good, may lend more credence to that.
------------------
Greg Holden
96 GSR, JSRC @10psi, All the Goodies!
Best 1/4 ==> 13.937 @ 101.41mph (at 6psi)
My JRSC Install Site
-
May 29th, 2001, 03:39 PM
#4
Inactive Member
Hi guys. Just wanna see if my recent dyno figures are measuring up to what I should expect. Here's my setup. . .
1995 GSR
JR supercharger (6 psi)
3" short ram intake
BBK 215 lph in tank fuel pump
Dyno'd at:
217 hp
155 ft-lbs
-
May 29th, 2001, 03:44 PM
#5
Inactive Member
yes those are very good. You wouldnt happen to have a dyno plot to scan. If you dont have anywhere to host it online send me a jpeg and I could post it for you.
I only hope I hit that high. 
--------------
JRSC, Cartech FMU, Injen 3" CAI, Walbro GSS 317, H&R Sport Springs, KYB AGX, Clutch Spcialties Stage 2, Comptech Flywheel
-
May 29th, 2001, 03:46 PM
#6
Inactive Member
my girlfriend seems to have a scanner. . .never used it before. . . will try that soon. If I can, I'll try to get it to you so you can post it.
Thanks.
-
May 29th, 2001, 03:48 PM
#7
Inactive Member
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by 3rdTeg:
my girlfriend seems to have a scanner. . .never used it before. . . will try that soon. If I can, I'll try to get it to you so you can post it.
Thanks.<HR></BLOCKQUOTE>
no prob
-
May 29th, 2001, 03:51 PM
#8
Inactive Member
3rdTeg, is that with stock exhaust?
-
May 29th, 2001, 03:55 PM
#9
Inactive Member
Yup. . .stock exhaust. . .stock cat. . . stock headers.
I hope to get 3" thermal exhaust, kamikaze headers and some sort of aftermarket cat within the next year. . .
-
June 13th, 2001, 11:27 PM
#10
Inactive Member
I used a generic 3" chrome tube and a Tenzo air filter. In addition, I capped the vacuum line to the filter and I added a K&N breather to the valve cover.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks